비전랩사이언스에 오신것을 환영합니다.

Origin : Made in USA (미국)
* NuAire Quality Statements (품질 보장 인증) :
ISO 9001:2000 Certificate (품질경영시스템 국제규격 인증)
    ISO 13485 Certificate (의료기기 인증)

* Class 100 Air Flow Within the Chamber
* Dual Temperature Sensor Probe & Digital Infrared CO2 Gas Sensor
* Replaceable HEPA Filter
* Direct Heat with Sterilization (Dual Decontamination Cycles)

Application/사용분야
* 모든 세포 및 조직 배양 관련 연구
* 오염물질 반입이 쉬운 세포 배양 연구
* Storage and Preservation of Embryos, Gametes and Animal Tissue Cell Cultures at on near
   body Temperature.
* in vitro Fertilization, Genetic Disease, Cancer Research etc.
* Microbial Organism (Mycoplasma, Chlamydia etc.) Control

Features/특징
* Class 100 Air Flow Within the Chamber : HEPA 필터는 매 1분 간격으로 챔버 내 공기를 완전 순환시켜
* 챔버 내의 공기를 청정 상태로 지속 유지
* Dual Temperature Sensor Probe & Digital Infrared CO2 Gas Sensor
* Replaceable HEPA Filter
* 챔버 오염시 두 가지 (95℃ Humidified Decontamination Cycle or 145℃ Dry Decontamination Cycle)
소독 사이클을 이용하여 멸균
* 비분산 적외선 CO2 센서 채용으로 매우 안정하고 잦은 보정이 필요 없는 측정으로 챔버 내 정확한
CO2 조절이 가능
* 교체가 용이한 대형 HEPA 필터 카트리지는 순환 시 공기를 여과하여 챔버 내부 환경을 청정으로 유지
* Fan과 Blower를 통한 챔버 내부 공기는 매우 느린 속도로 균일하게 순환되며 세포 성장에 영향을
미치지 않음
* 잦은 문 여닫이에도 챔버 내부는 분당 0.3℃의 속도로 온도 보상되며, 시료에 온도의 영향을 최소화 함
* Microprocessor Based, Non-Dispersive Infrared CO2 Sensor is within the Chamber Air Plenum so very
Accurate CO2 control is achieved.
* The Microprocessor is "User-Friendly" with Status Indicators, LED Display of Control Parameters and a
Touch Control Keypad to permit Efficient Operator entry of Data.
* Directly Heated by Foil Heating Elements attached to the Sides, Bottom, Top and Back of the Chamber
* Constant Air Circulating within the Chamber using a Continuous Operating Fan / Motor / Blower within
the Upper Air Plenum and Sidewall Duct System
* Continued Air Filtration in the chamber using a Large Replaceable 99.99% Efficient HEPA Filter Cartridge
* HEPA Filter is made for Decontamination Cycle Temperatures.
* The HEPA Filter Uniformly distributes and cleans the Air within the Chamber at a rate of one Complete
Change per Minute.
* Relative Humidity Level up to 95% is achieved in the Incubator by the Use of a Stainless Steel Pan filled
with Distilled Water and Placed on the Bottom of the Chamber.
* An Air Pump Continuously Introduces Fresh Air into the Chamber at a Variable Rate to Reduce
Condensation.
* Reliable, Accurate, Stable Temperature and Infrared Gas Controls with Quality and Value to meet
   Laboratory Performance for Optimum Growth Conditions
* The Interior Corners of the Growth Chamber are Coved for Ease of Cleaning and to prevent Contaminants
from becoming Trapped.
* All Stainless steel Shelves, Shelf Supports, Guide Rails, and Air Plenum are easily Removable for Cleaning
* A Microprocessor Controlled Air Pump Injects Air at User Settable Intervals to control Condensation.
* The incubator is programmed with options that give the user control of System use, CO2 sensor calibration
procedures, alarm parameters, & adaptation to different lab environments.

Direct Heat Sterilization (Dual Decontamination Cycles)
* 95℃ Humidified Decontamination Cycle Eradicates Contaminating Agents.Complete Cycle Takes
14 Hours to Run
* 145℃ High Temperature Dry Decontamination Cycle Eradicates Contaminating Agents. Complete
   Cycle