비전랩사이언스에 오신것을 환영합니다.

Simple One-hand Operation for Right- or Left-handed
* Avoid the Repetitive Strain Injuries and Related Pain by Manual Tip Ejection
* Large Clear Display
* Light-weight Battery for over 4000 Pipetting Cycles with One Battery Charge
* Ergonomic construction with only One-button Operation
* Simple uncomplicated Interface with only 4 Function Buttons
* Lightweight, Less than 200 grams
* Comfortable in the Hand for a Relaxed Grip
* Fitting All Common Pipet Tips
* Conformity Certified

* 인체공학적 설계로 잡기가 편안하고, Standard Pipetting 중, 95% 이상의 불필요한 힘의 감소를 제공.
* 대부분의 전자식 피펫보다 더 작고 가벼움.
* 크고 선명한 디스플레이로 Reading과 Operation이 쉬움.
* 재충전하기 전까지 4000번의 Pipetting이 가능한 공간 절약형의 가벼운 Battery.
* Tip Ejection with acoustic signal:
   After completion of the pipetting press the tip ejection button a the reverse side for releasing the tip.
   An acoustic signal confirms your action.
* Pipetting Process :
   The pipetting process, aspiration and dispensing, are initiated by pressing the large button on the pipette
   head, which is in conformity with the conventional digital pipette.
* Battery Charger : Supplied with every pipet. For a short recharging-time.
* Size : Length 300 mm

“Easy-To-Use” Functions
(1) Pipet Function :
     In AUTO mode the pipette performs the aspirating and dispensing of the selected liquid volume.
     “Blow-out”f unction can be set.
(2) Reverse Pipetting :
     The Automatic Reverse Pipetting, in different modes is to reserve the final drop of sample, a higher volume
     than required is aspirated. This function is recommended for the pipetting of high-viscose media and high
     steam pressure respectively.
(3) Multidispensing (MD) Mode :
     The Pipette performs repetitive dispensing of a selected volume, e.g. filling of 96-well microliter plates,
     you can select the number of dispenses and the pipetting function in sequences.
(4) Mix Function (MIX) :
     After the settings are completed, Mixing of different kinds of media is performed.
     The Mix Function is controlled via the trigger button.
(5) Pipetting Speed (SPEED) :
     The Selection of Available Speeds of the piston for the aspirating and dispensing enables the pipetting of
     media with different properties, e.g. viscosity.
(6) Sequential Aspirating /Dispensing (SE) Mode :
     Functions-Mode SA: The “EP”-Pipette performs repetitive aspirating of the selected volume between two
     aspirations automatically an air gap. When the sequential aspiration is completed, the total aspirated
     volume is dispensed in the next step.
     Functions-Mode SD: The “EP”-Pipette performs repetitive dispenses of the selected volume When the first
     aspiration is completed, the pipette will sequentially dispense their aspiration.
     volume.

WITOPET “EP” Single Channel Pipet
WI.5.402.302    Pipet, Electrical, EP 20, 2 ~ 20㎕, divi. 0.1㎕
                &